Honeywell Model 700 Signal Processor
Model 700 Signal Processors are Single – Channel, Fail Safe, Self – Checking Flame Monitoring Systems when used in Conjunction with the S70X/S80X Series Viewing Heads.
They offer Easy Setup, Medium Level Discrimination and High Reliability.
- Models Available in AC (700ACSP) or DC (700DCSP) Input Voltage
- Intuitive Keypad for Easy Setup and Configuration
- Two – Digit Numeric Display and Four LED Status Indicators
- Compact DIN Rail Mountable Design Utilizes Only Three Inches of Space
- Plug – In Terminal Connectors Allow for Easy Installation
- Low Power Consumption
- Environmentally Sealed Switches
- Modbus RS422 Communication for Use with FLAMETOOLS – PC or FLAMETOOLS – HMI/U Supports 32 Loops
- Primary Input Power for Model 700ACSP is 85 to 265 VAC, 50 or 60 Hz, 0.07 A Max with 24 VDC Backup Power
- Primary Input Power for Model 700DCSP is 22 to 26 VDC, 250 mA max with 24 VDC Backup Power
- Ambient Temperature: 32°F to 140°F (0°C to 60°C)
- Flame Relay: 2 Form C Contacts
- Self – Checking Relay: 1 Form C Contact
- Relay Contact Ratings: 5 A at 125 VAC, 277 VAC, & 30 VDC; 1/8 HP 125 & 250 VAC
- Analog Flame Signal: Isolated 0-20 mA or 4-20 mA Output for Remote Meters
- Auto Burner Configuration for Burner On/Off
- Adjustable Flame Relay On/Off Set Point
- Adjustable FFRT 1, 2, or 3 Seconds
- 2 – 4 Burners Steam Generator
- Duct Burners
- Multiple Burner Heaters
- Furnaces and Reformers
- Natural Draft Burners
700ACSP – 85 to 265 VAC
NOT IN STOCK (Available For Back-Order)
700DCSP – 22 to 26 VDC
NOT IN STOCK (Available For Back-Order)